1260°C High Temperature Ceramic Fiber Blanket - Lightweight and Flexible Thermal Insulation Blanket with Low Thermal Conductivity

Heating Furnace Roof Ceramic Fibre Blankets For High Temp Kilns

Ceramic Fiber Blanket is a lightweight, flexible, and high-performance thermal insulation material widely used in industrial and commercial high-temperature applications. Manufactured from high-purity alumina-silica fibers, this blanket is engineered to withstand continuous operating temperatures ranging from 1000°C (1832°F) to over 1600°C (2912°F), depending on the specific grade. It is the material of choice for applications where traditional refractory bricks or castables are too heavy, too slow to install, or thermally inefficient.

The production of ceramic fiber blankets begins with melting a precisely formulated mixture of alumina (Al₂O₃) and silica (SiO₂) in an electric arc furnace at temperatures exceeding 2000°C. The molten material is then transformed into fine fibers through either a spinning or blowing process, similar to how cotton candy is made. These fibers are immediately collected and "needled"—mechanically entangled using thousands of barbed needles—to form a cohesive, flexible blanket without the use of chemical binders. This needling process gives the blanket exceptional mechanical strength and handling durability while preserving its fibrous structure and thermal properties.

Ceramic fiber blankets are used extensively as furnace linings, back-up insulation behind refractory bricks, expansion joint fillers, weld stress-relieving covers, fire protection barriers, and high-temperature gaskets. In the petrochemical industry, they insulate reformers and crackers. In power generation, they protect gas turbines and boiler systems. Forges, kilns, and incinerators also rely on these blankets to improve thermal efficiency and worker safety.

Installation is straightforward, typically involving mechanical anchoring or impaling pins. The blanket can be cut with a sharp knife or scissors. However, due to the respirable fiber content, appropriate safety precautions—such as wearing gloves, dust masks, and eye protection—should be followed to minimize skin irritation and avoid inhalation of airborne fibers.